Bed Sheet Sizes Explained and How to Measure Your Mattress
You ordered a queen set for your queen mattress, and the fitted sheet either strains at the corners or bunches in a loose pocket of fabric underneath you. The label says queen, the mattress says queen, and still they do not agree.

You ordered a queen set for your queen mattress, and the fitted sheet either strains at the corners or bunches in a loose pocket of fabric underneath you. The label says queen, the mattress says queen, and still they do not agree. Bed sheet sizes are less standard than they look, and depth is usually the missing number.
I have measured dozens of mattresses for friends, family and my own guest rooms, and the fix almost always takes five minutes with a tape measure. This guide gives you the real dimensions behind each size label, how to measure properly, and what to check on a package before you buy.
Standard bed sheet sizes in the US
The width and length of a mattress are fairly consistent across brands. The table below shows standard mattress dimensions, along with typical flat sheet dimensions for each size.
| Size | Mattress (inches) | Typical flat sheet (inches) |
|---|---|---|
| Twin | 38 x 75 | 66 x 96 |
| Twin XL | 38 x 80 | 66 x 102 |
| Full | 54 x 75 | 81 x 96 |
| Queen | 60 x 80 | 90 x 102 |
| King | 76 x 80 | 108 x 102 |
| California King | 72 x 84 | 108 x 102 |
| Split King | Two 38 x 80 | Two Twin XL fitted sheets, one king flat sheet |
Two sizes cause most of the mix ups. Twin XL is five inches longer than a regular twin, which matters for college dorm beds. California King is narrower and longer than a standard King, so a regular King fitted sheet will be loose on the sides and tight at the ends. If you are not sure which you have, measure. Do not trust the memory of what the store said years ago.
UK and European sizes are different
If you bought bedding abroad or from an overseas shop, note that a UK double is 135 x 190 cm and a UK king is 150 x 200 cm, while a common European double is 140 x 200 cm. None of these line up exactly with a US full or queen, which is why imported sheets so often fit badly.
Why mattress depth matters more than the size label
Width and length are standard. Depth is not. A basic innerspring might be 9 inches deep, a pillow top hybrid can reach 16 inches, and once you add a 3 inch topper and a mattress protector, you could be dressing an 18 or 19 inch stack.
Sheet makers sort fitted sheets by pocket depth:
- Standard pocket: fits mattresses about 7 to 12 inches deep.
- Deep pocket: fits about 13 to 16 inches.
- Extra deep pocket: fits about 17 to 22 inches.
The right pocket is about 2 inches deeper than your mattress, so the elastic can tuck fully under the edge. Too shallow and the corners snap off overnight, a problem we cover in detail in why fitted sheets pop off the corners. Too deep and you get a baggy skirt of fabric that wrinkles under your hips. If your mattress is unusually tall, look for elastic that runs the whole perimeter and corner seams that are double stitched, since those take the most strain.
How to measure your mattress for sheets
This takes five minutes and saves a return. You need a soft tape measure or a rigid one plus a helper.
- Strip the bed down to the mattress, but leave the topper and protector on if you plan to keep using them. Measure the bed as you sleep on it.
- Measure the width across the middle of the mattress from edge to edge, not across the head, where some mattresses taper slightly.
- Measure the length from the head to the foot along the center.
- Measure the depth at a corner, from the bottom seam to the highest point of the top surface. Pillow tops rise in the middle, so also check depth at the center of the long side and use the larger number.
- Write the three numbers down and keep them in your phone notes. Next time you shop, you can compare them against the package in seconds.
Reading a sheet package before you buy
Most packages list the fitted sheet as width x length x pocket depth, for example 60 x 80 x 15 inches. That last number is the one to compare against your measurements. If a listing only says "fits up to 16 inches," check whether that includes a topper or not; some brands mean the bare mattress.
Also look at the flat sheet. A queen flat sheet of 90 x 102 inches gives a comfortable tuck on a 12 inch mattress, but on a 16 inch mattress it may barely reach past the sides. Many better brands increase the flat sheet to 94 or 96 inches wide in their deep pocket sets. If you skip the flat sheet entirely, our piece on top sheet or no top sheet explains when that makes sense.
The counter-take on sizing up for a looser fit
A common shortcut is to buy the next size up, say a King fitted sheet for a Queen mattress, so the corners never pop. I would not do it. A King fitted sheet is 16 inches wider than a Queen mattress, so it bunches along both sides, creating ridges you feel at night and creases that wear the fabric faster.
The better answer is to stay at your actual size and choose the right pocket depth. Elastic that runs the full perimeter, rather than only at the corners, also helps a lot. If you still have slipping, sheet straps or suspenders cost 8 to 15 dollars and solve it without a sloppy fit.
Allow for shrinkage
Cotton sheets can shrink 2 to 5 percent in the first few washes, especially if dried on high heat. On a 15 inch pocket, that is enough to turn a snug fit into a struggle. Linen and flannel often shrink a bit more. Buy a pocket with an extra inch of room if you plan to tumble dry, wash in cool or warm water, and take the sheets out while they are still slightly damp.
Frequently asked questions
Will queen sheets fit a full bed?
They will go on, but they will be loose. A queen is 6 inches wider and 5 inches longer than a full, so the fitted sheet bunches along the sides and the foot. For a smooth fit, buy full size sheets with the right pocket depth.
What size sheets fit a California King?
You need sheets labeled California King, since the mattress is 72 x 84 inches. A standard King fitted sheet is 4 inches too wide and 4 inches too short. The flat sheet and duvet are more forgiving and often shared between both king sizes.
How deep should a fitted sheet pocket be?
Aim for a pocket about 2 inches deeper than your mattress, including any topper and protector. For a 14 inch stack, a 16 inch pocket is ideal. That leaves enough fabric for the elastic to grip under the mattress edge.
More in Sheets and Bedding
Sheets and Bedding
How to Choose Crib and Toddler Bed Sheets That Fit
The sheet that taught me to care about this came in a set with a matching quilt and bumper, none of which we used.
Sheets and Bedding
How to Tell When Sheets Are Worn Out and Replace Them
A fitted sheet tore in my hands on a Sunday morning, at the corner, while I was doing nothing more violent than pulling it over...
Sheets and Bedding
Bunk Bed Sheets That Fit and Are Easy to Change
Changing the sheets on a top bunk is one of those household jobs that looks simple until you are kneeling on a ladder rung, one...