How to Choose a Headboard That Fits Your Bed and Room
A bed without a headboard can look unfinished, and pillows slide down the gap against the wall every night.

A bed without a headboard can look unfinished, and pillows slide down the gap against the wall every night. But when you start shopping, it is hard to know how tall, how wide or which material will actually work in your room, and returning a bulky headboard is a hassle nobody wants.
This guide shows you how to choose a headboard by measuring first, then matching height, width, material and mounting style to the way you use your bed. It takes about ten minutes with a tape measure and saves a lot of guessing.
Measure before you choose a headboard
Grab a tape measure and write down four numbers:
- Mattress width. In the US, a full is about 137 cm (54 inches), a queen 152 cm (60 inches) and a king 193 cm (76 inches). UK and EU sizes differ, so measure your own mattress rather than trusting the label.
- Top of the mattress from the floor. Include any topper. Most beds land between 55 and 70 cm.
- Ceiling height. Standard rooms are around 240 cm, older homes often more.
- Distance to windows, outlets and light switches on the wall behind the bed.
The width rule is simple. The headboard should be the same width as the mattress or up to 10 cm wider in total, so it overhangs about 5 cm on each side. Narrower than the mattress looks like a mistake. Much wider than the bed starts to crowd the bedside tables.
How tall your headboard should be
Height is where most people get it wrong. The part that matters is how much of the headboard shows above the mattress, not the total height from the floor.
- 50 to 60 cm visible above the mattress suits most rooms and covers two standard pillows propped upright.
- 65 to 80 cm visible is the range for people who read or work in bed, because it supports your head and shoulders.
- Taller than 90 cm visible is a statement piece that works best with ceilings of 260 cm or more.
A quick check: tape a sheet of paper or painter's tape on the wall at the height you are considering and live with it for a day. If it covers a window sill or crowds a light switch, go lower. Leave at least 5 cm between the top of the headboard and any window frame.
Choosing the right material for how you sleep
| Material | Feels like | Best for | Watch out for |
|---|---|---|---|
| Upholstered fabric | Soft and cozy | Reading in bed, quiet rooms | Absorbs hair oil and dust |
| Solid wood | Warm and sturdy | Long lasting, easy to wipe | Hard to lean on without pillows |
| Metal | Light and airy | Small rooms, guest beds | Can squeak if bolts loosen |
| Rattan or cane | Textured and relaxed | Warm climates, light bedding | Gaps snag pillowcases |
| Faux leather | Smooth and wipeable | Kids' rooms, pet owners | Can crack after a few years |
Think about the bedding you already own, too. A pale linen headboard next to crisp white percale reads calm and soft. A dark wood headboard grounds bright patterned duvets. If your bedding changes with the seasons, a neutral headboard in oatmeal, gray or natural wood will work with almost anything.
Upholstered headboards are not always the cozy choice
Upholstered headboards are sold as the obvious pick for comfort, and they do feel nice to lean against. The trouble shows up after a year or two. Your head rests on the same strip of fabric every night, and skin oils and hair products leave a darker band right above the pillows. Fabric also collects dust and gives dust mites one more place to settle, which matters if anyone in the house has allergies. Our guide on how to reduce dust mites in your bedroom explains why soft surfaces near the pillow add up.
If you love the look, choose a model with a removable, washable cover, or a tight performance fabric such as a polyester blend rated for at least 30,000 double rubs. Otherwise, a wood or metal frame with two firm euro pillows in front gives you the same back support and is far easier to keep clean. You can wipe it down in 30 seconds.
Bed frame mounted or wall mounted
There are two main ways to attach a headboard, and the choice affects noise as much as looks.
Frame mounted
Most headboards bolt to the back of a metal or wooden bed frame with two or four brackets. Check that the bolt spacing matches your frame before buying; many listings show it in the specs. This style moves with the bed, so it can knock against the wall if you shift around. A pair of felt or rubber bumpers on the back stops that.
Wall mounted
A wall mounted headboard hangs on a French cleat or brackets screwed into the wall studs. It stays silent no matter how restless you sleep, and it works with platform beds or divans that have no attachment points. You will need to find studs, usually spaced 40 cm apart, and use proper wall anchors if you hit plasterboard only. Mount it so the bottom edge sits 5 to 10 cm below the top of the mattress to avoid a visible gap.
Making the headboard look finished with your bedding
A headboard sets the frame, but the bed in front of it does most of the visual work. Start with a neatly made base and a top layer that drops evenly on both sides; our guide on how to make a bed that looks and feels great walks through it step by step.
Then use pillows to bridge the bed and headboard. Two sleeping pillows plus two euro shams standing upright will cover the lower third of a medium headboard, which is the proportion that looks balanced. Add one or two smaller cushions at most. For more on spacing and sizes, see how to arrange throw pillows on a bed without clutter.
Finally, look at the bedside tables. Their tops should sit within about 5 cm of the mattress height, and lamps should rise above the top edge of the headboard or sit clearly below it. A lamp shade that lines up exactly with the headboard edge makes both look awkward.
Frequently asked questions
Should a headboard be wider than the bed?
A headboard can match the mattress width or be slightly wider, up to about 5 cm on each side. That small overhang makes the bed look finished and stops pillows from slipping off the edge. Going much wider can crowd bedside tables in a small room.
How high should a headboard be above the mattress?
For most bedrooms, 50 to 60 cm above the mattress looks balanced. If you read or watch shows in bed, aim for 65 to 80 cm so your head and shoulders are supported. Very tall headboards suit rooms with ceilings above 260 cm.
Can you put a headboard on any bed?
Most bed frames have brackets for a bolt on headboard, but platform beds and divans often do not. In that case, choose a wall mounted headboard fixed into the wall studs. Measure the frame width and bolt spacing before ordering to avoid a poor fit.
More in Bedroom Style
Bedroom Style
How to Choose a Bed Skirt That Stays Put and Looks Neat
The bed looked finished for about four days. Then the skirt had crept round on the box spring, one corner pleat sat on top of a...
Bedroom Style
How to Choose Blackout Curtains for a Darker Bedroom
In June my bedroom starts getting light at about quarter past four, and for two summers I woke with it.
Bedroom Style
How to Make a Small Bedroom Feel Bigger and Calmer
A small bedroom can feel like you are sleeping in a hallway: the bed fills the floor, the wardrobe door hits the frame, and...